Category Archives: Baby

DIY Pull-over Bib with a Bow Tie

OK, so having a baby now doesn’t give me as much time to do the millions of things I have swimming around in my head. But here’s a project I absolutely forced myself to carve out time for.

DIY Bib with bow tie

The little guy is a big drooler at the moment (he’s almost 4 months now, so I guess teething is a thing that starts around now?) and he basically soaks through 2-4 bibs a day. A lot of the bibs that he was gifted (usually as a set with a matching onesie) are teeny, and not really very useful. But two that we got were basically towels with a hole cut out for his head. Ah Ha. So I decided to try my hand at a cute versionĀ  – with a bow tie! Perfect for those “special” occasions, ya know. (Seriously, with wedding season coming up, not to mention just fun holidays and stuff, this little extra detail will be my one effort to cute-en him up).

 

Pull-over Bib with Bow Tie Tutorial
Materials:
>terry cloth (I bought1/2 yard at the fabric store, but you could easily use a towel)
>backing material (on my first bib, I just used another layer of terry cloth. on this one I used polar fleece)
>double bias tape
>stretchy rib-knit fabric for the collar
>colorful fabric for the bow tie
>thread, pins, scissors & sewing machine

bib fabricStep ONE
Cut out your terry cloth and backing fabric to 15″ x10″

 

cut head holesStep TWO
Cut out the hole for the head. My babe is about 4 months, and I wanted the bib to be somewhat snug while still comfortably fitting over his head. I made the opening diameter 5 inches. Positioned 2″ from the top and centered from side to side.

 

two layers sewn togetherStep THREE
Pin together your two layers (right sides facing outward). Sew a 1/4″ hem all the way around, and radius your corners (I used a light colored pen to mark the corners as a guide).

 

Trim the fabricStep FOUR
Trim your shape to about 1/8″ from your stitching. This will get covered up by bias tape later. Pin around the neck hole.

 

Pin bias tapeStep FIVE
Sew around the neck hole with a V stitch (or use a serger). Then pin your bias tape around the perimeter of the bib. (This is a pretty good tutorial on how to sew with double bias tape and not have it turn out all wonky)

 

bias tape addedStep SIX
Stitch on the bias tape!

 

assembling the collarStep SEVEN
Cut a strip of knit ribbing 2.5″ x 11″. Fold it in half and sew the ends together with a V stitch. Then fold the whole thing over like a turtle neck.

 

pin collar to the neck holeStep EIGHT
Pin the knit collar to the neck hole, matching the tops, bottoms and two sides. This will keep the stretch of the collar uniform.

 

collar attatchedStep NINE
Sew the collar to the neck hole with a V stitch, making sure the sewn part happens on the back side of the bib. (This was probably the trickiest part of this project for me.)
And there you have a functional bib!

…and here’s adding the bow tie detail…

rectangle for the bow tieStep TEN
With your colorful fabric, cut a 5″ x 4.5″ rectangle. Fold lengthwise, right sides facing inward. Stitch almost all the way around with a 1/4″ seam allowance, leaving enough of a hole to flip the rectangle right-side-out. Once it’s flipped right-side-out, fold in your opening hole, and then stitch all the way around as close to the edge as you can.

sew the tie middleStep ELEVEN
Sew a tube for the middle of the bow tie. I did mine from a long rectangle 2.5″ wide, giving me a 1″ strip when it was turned right-side-out.

pinch the middle to make a bow shapeStep TWELVE
Pinch the middle of the big rectangle (like an accordion fold) and wrap the smaller fabric strip around it. Trim off the excess from the strip, and stitch it into place. Now you have your bow tie!

attatch the bow tie to the bibStep THIRTEEN
Position the bow tie pretty close to the collar and pin into place. Hand-stitch all around to secure in place (this will keep little hands from grabbing loose edges and pulling the bow tie off, with their orangutan strength).

 

And there you have it! Slip the bib over your little one’s noggin and enjoy the cuteness. (Pay no attention to the crazy-eyed daddy)
bow tie bib

Something I learned while making this bib – terry cloth is MESSY! Cutting it will make a confetti of little cotton snow all over the place. And it will probably take a couple washings before the bib stops shedding them. Pbbt šŸ˜›

Advertisements

1 Comment

Filed under Baby, Crafts, DIY, projects, sewing, tutorial